Many folks are now using wood-fired heaters for warming their homes during this winter. Here’s a simple guide to assist you in starting and maintaining your wood heater.
Quick Tips for Wood Heaters
Learning how to operate wood-fired heaters correctly helps you to achieve efficient and clean wood heating. Incorrect usage will produce low heat and cause air pollution. Here are some quick tips before you start using a heater:
⦁ Use an appropriately sized heater. If you buy a larger heater than the area you have to heat, you’ll have to turn it down regularly, which leads to smoke pollution and lower efficiency.
⦁ Avoid overloading your heater as it only wastes fuel while preventing efficient combustion.
⦁ Clean the flue or chimney before every winter to remove creosote build-up.
⦁ Never burn unseasoned wood, plastics or wood that has been painted or chemically treated
⦁ Check that your chimney is not producing excessive smoke, as it means that you’re wasting heat and fuel while contributing to unnecessary smoke pollution.
Starting Wood Heaters
The primary ingredients for successfully starting wood heaters Sydney are fuel, heat, and oxygen. The fuel here is the wood, while oxygen is the air supply and the preliminary heat source can be kindling wood, firelighters or even burning some paper.
Start with smaller pieces of firewood and gradually add the larger pieces after you establish a fire bed. It ensures that the coals have adequate heat to quickly bring larger pieces to their combustion temperatures and keep the fire going.
Tips for Efficient Burning When Using Wood Heaters
⦁ Ensure you are using dry and seasoned wood
⦁ Start the fire with adequate kindling to quickly get a fire going
⦁ Add smaller pieces of split wood to maintain the fire
⦁ Run wood heaters with the air vent open for high burning for at least 30 minutes
⦁ Provide enough aeration between your wood logs by not filling up the heater with wood
⦁ If your fire dies down to a couple of coals, start by rekindling it with the smaller pieces before finally adding the bigger pieces
Maintaining the Fire and Keeping It Running Efficiently
The best strategy for using wood-fired heaters is building small fires and providing an adequate supply of air, instead of creating massive fires and partly closing the central air intake. It will help you prevent smouldering, which burns inefficiently and provides significantly less heat.
Smouldering causes air pollution, and it can quickly upset your neighbours. Also, it allows cinders, partly burnt wood or coal, to accumulate in your chimney, which may lead to chimney fires.
Each time you want to add more wood, first open the heater’s air intake before adding the appropriately sized timber. Remember to rekindle the fire if it has burned down completely.
After roughly 10 to 20 minutes when the fire is scorching and burning the wood properly, you can reduce the heater’s air intake for a more comfortable fire.
Maintaining a steady or moderate fire will give you excellent results with regards to providing the warmth you want.
Australia’s air quality is typically excellent, but it does get some significant smoke pollution in winter due to the inefficient use of wood-fired heaters. Therefore, learning ways of correctly starting and maintaining wood heaters is essential to guarantee efficient heat production, minimize smoke pollution, and prevent conflicts between neighbours. Always remember to practice safety first!