Everything

How to Take Care of Your New Sealcoating? 5 Pro Tips

Pinterest LinkedIn Tumblr

Sealcoating is one of the best ways to take care of your asphalt paved surface. It not only protects asphalt surfaces from the elements, it also ensures they last longer. Though it comes in liquid form, asphalt sealant creates a barrier that protects asphalt surfaces from constant threats.

However, it’s important to note that the job doesn’t end after the sealcoating project is over. To enjoy the maximum benefits of your new sealcoating, there are a few steps that you must take to take care of the new sealcoating.

The first thing to note is that taking care of your new sealcoating is not all about looks. Once the sealcoating is done, you’ll need to ensure you protect the surface. Failing to take the necessary steps can lead to serious deterioration of your asphalt surface. To ensure the effectiveness of your new sealcoating, we shall discuss 5 pro tips to take care of your new sealcoating.

Don’t allow traffic on the surface

It’s very tempting to allow cars onto the asphalt surface immediately after applying a new layer of sealer—particularly when it feels dry to touch after a few hours. However, you should be patient, and give the surface ample time to cure. Failing to do so risks rending all the work you’ve put in place void.

The contractors at ABС Paving, a sealcoating contractor from Florida say that allowing traffic to access a newly sealed asphalt surface can lead to scuff marks, which are very happening as cars turn their tires. These marks can be worse in the case of heavier vehicles. For the best possible results, use tape, cones, or any other form of barrier to prevent traffic from accessing the surface for at least 24 hours after applying the sealer.

Don’t walk on the surface immediately

Sealcoating an asphalt driveway or parking lot doesn’t require a lot of time. Interestingly, most of the time is spent while waiting for the surface to cure—but most people aren’t patient enough for this. That’s why most homeowners are eager to know how long they should way before they start walking on the driveway again.

However, there’s no definite time that you should wait, as it depends on the temperature. Heat is one of the most essential components required for asphalt to cure. So, if you choose to seal coat your surface during the summer, you’ll not wait for long. However, your surface can take more than 24 hours to cure if during cooler months.

Spray water on your surface

Spraying water on your surface after sealcoating helps the sealer to cure faster. This is particularly helpful if you sealcoat your driveway during the summer. However, it’s not that important during the cooler months. The whole process of spraying water on your driveway shouldn’t take more than 2 minutes.

Here’s the best way to spray water on your newly sealed surface:

  • Do it in the morning or evening for optimum results—avoid watering the surface when the sun is directly over the newly sealed surface.
  • Always use a water hose to make your work easier.
  • Ensure you cover at least 90% of the surface, and target the areas accessed frequently.

Keep the surface clean

If trees surround your home, it’s very common for pine needles and leaves to find their way to your newly sealed driveway. However, you shouldn’t panic when you see such kind of natural debris on the driveway since it cannot cause long-term or serious problems. The debris should dry within a day or two, and the wind will blow it away. If that’s not the case, you can sweep or blow it away.

But, the most serious things to watch out for are gas stains and oil puddles, as they have the potential of causing long-term damage to your driveway. Always have a bag of cat litter close after sealcoating your driveway—it is a cheap and effective solution for oil and gas spills.

To clear gas or oil spills, prink some cat litter on the puddle, and allow it to absorb. This should take around 30 minutes. After that, use a broom to sweep the litter. Cat litter can absorb 70% – 90% of oil and gas stains.

Prepare your surface for winter

Slick spots and black ice can make it dangerous to drive over an asphalt surface during the winter. Therefore, it’s essential to prepare in advance. If possible, avoid using common de-icing products on your newly sealcoated driveway. Research indicates that deicing chemicals can break down your driveway, thus affecting its durability.

The most effective way to protect your driveway or parking lot during the winter is by using sand. Spreading some generous amount of sand on the surface before snowing starts. With this, you’ll have created a form of beach on your surface, which should provide traction to vehicles, while protecting the sealer.

Bottom Line

Following these tips will help to protect your new sealcoating. However, this is not the only thing that you should do to keep your surface in a good condition. You will require to constantly maintain your surface to protect it from other forms of damage like cracks. For the best possible results, always let a professional asphalt contractor inspect your asphalt at least twice a year.

READ ALSO: How to Save Money with Tenant Build-Outs: 5 Pro Tips

Author

What do you think?

%d bloggers like this: